Bulk materials are loaded into the receiving cylinder from the hopper. The materials are not exposed to the wall of the cylinder and piled on the disc by their own weight. Adjust the gap between the sleeve and the disc by adjusting the bolt to control the natural pile of materials on the disc. angle. When the disc rotates, the material is evenly scraped by the discharge knife on the disc to the outside of the disc and falls, so that as the disc rotates, the material is evenly scraped into the receiving hopper by the discharge knife. Continuous operation of the disc completes the uniform feeding operation. Adjusting the gap between the unloading knife and the disc can also control the amount of feed. When working, the motor drives the disk mounted on the worm reducer to rotate through the pulley.
|Type||Model||Disk Diameter (mm)||Rotating Speed of Disk (r/min)||Max. Feed Size (mm)||Feed Capacity (t/h)||Motor Model||Motor Power|
|YG300||300||10. 0||20||0~ 1. 8||Y80L- 4||0. 55||115|
|YG400||400||10. 7||0~ 2. 6||Y90L- 6||1. 1||120|
|YG500||500||0~ 3. 3||124|
|Close||YG600||600||10. 0||0~5. 0||130|
|Hanged||YG800||800||9||30||0~8. 0||Y80L- 4||0.55||195|
|YG1000||1000||9||30||0~ 12||Y90L- 4||1. 5||263|
|YG1500||1500||7||40||0~ 22||Y132M2-6||5. 5||755|
|DK600||600||7. 53||25||1. 8~ 3. 9||Y90L- 6||1. 1||410|
|DK800||800||7. 53||30||3. 5~ 7. 6||600|
|DK1000||1000||7. 50||40||1.8〜16.7||Y100L- 6||1. 5||725|
|DK1300||1300||6. 5||50||4. 3~27. 9||Y132S- 6||3||846|
© 2021 Yantai KZ Mining Processing Technology & Equipment Inc.