24-hour service hotline 0086 18733132385
Send us an email [email protected]
Home Solutions Quartz Sand Production Line
Wolframite Mineral Production Line

Wolframite Mineral Production Line

Wolframite consists of the quartz dyke type ores and veinlet tungsten ores. Dissemination size of ores is relatively coarse, so it is easy to separation. Xinhai wolframite mineral processing is a combined separating technology which mainly use gravity separation. And four stages are involved in this process, roughing, gravity separation, cleaning, and slime treatment.

Solution Introduction


In the stage of roughing, Xinhai provides a  method for the wolframite beneficiation plant. That is using vibrating screen and jig in the first stage of fine slime, then going directly to the process of cleaning.

Gravity Separation

In this stage, Xinhai would always apply the processing of multistage jig, multistage shaking table and regrind of middling. That is, after the stage of fine crushing, the qualified mineral will be classified by vibrating screen and then put into the multistage jig. After that the jig gravity rough concentrate is produced. The coarse jig tailings will be reground. The fine jig tailings will be classified by classifier and then put into multistage shaking table. After that the shaking table gravity rough concentrate is produced. The tailings will be discharged into tailings pond. The mineral left on the table will be reground and concentrated. The gravity sand concentrated by jig and shaking table will be concentrated in the process of cleaning.


In this stage, Xinhai would always apply the processing of flotation-gravity technology or flotation-gravity-magnetic technology, at the same time recycle the accompanying element. In this stage, by using the process of table flotation of coarse and fine particle fractions (combination of flotation and shaking table) and floatation, sulphide ores will be removed. Then the sulphide ore will put to sulfide flotation, and wolframite ore will be further concentrated through gravity sepatation. If the wolframite concentrate contains scheelite and cassiterite, the process of flotation-gravity technology or flotation-gravity-magnetic technology should be applied to separate out wolframite concentrate, scheelite concentrate and cassiterite concentrate.

Slime Treatment

Common practice of slime treatment in Xinhai is as following. At first, sulfur removal. Then according to the material property to select separation technology to recycle tungsten, such as gravity separation, floatation, magnetic separation, electric separation, etc or combination of several process. At the same time, comprehensive utilization of associated metal minerals.

Solution Appliion

This production line is especially applied to wolframite ore with an uneven distribution.  

Solution Cases

Preventative case: One of Xinhai wolframite  project

In that mine, distribution of wolframite was uneven, and the ores were extremely sliming. The previous plant applied the process  of crushing, gravity separation and cleaning. This kind of process was defective, which caused the loss of fine tungsten ore, high investment, and even poor index. In order to promote the condition, they authorized Xinhai to do technical reconstruction. Xinhai made a study of their ore features and process and optimized the wolframite mineral processing. By adding slime treatment in  the process, the plant finally reached the ideal beneficiation indexes. Indexes comparison are as following:

Comparison of ReformationConcentrate Grade β/%Concentrate Recovery Rate γ/%
Before Reformation65.0285.25
After Reformation69.2287.34

Reconstruction completed, it can obviously strengthens the recovery of fine particle and reduces the impact of the mud on the separation process. The recovery index became better realizing the comprehensive recycling of resources.

© 2021 Yantai KZ Mining Processing Technology & Equipment Inc.

WhatsApp 0086 18733132385
Message Leave a Message